StackIT POWER|2|DOOR P2D-900-V1 système de porte automatique
StackIT-Power2Door-P2D-900-V1-vitrine2 système de porte automatique pour CNC
StackIT Power2Door P2D-900-V1 système de porte automatique pour CNC

POWER|2|DOOR – Système de porte automatique pour CNC – 900mm

€3.100,00 Hors TVA

Protection des paiements MEMIDOS

Delivery Terms: DDU
  Poser une question
Company
StackIT
Danemark
UGS : P2D-900-V1 Catégorie : Étiquettes : , , ,

Vente au consommateur



garantie

12

Partagez ce produit avec vos amis :

Description

POWER|2|DOOR – Système de porte automatique pour CNC – 900mm

POWER|2|DOOR est conçu pour aider l’industrie de l’usinage en fournissant un système de porte automatique pour les machines CNC. Il s’agit d’une solution d’automatisation idéale, intégrée pour travailler avec un robot ou un opérateur CNC manuel. Le système d’automatisation peut ouvrir des portes d’une longueur maximale de 900 mm.

Notre ouvre-porte automatique est facile à installer, nécessite un minimum d’entretien et, surtout, assure la sécurité de tous les utilisateurs. Ce complément pour machine CNC rendra le travail quotidien avec les machines CNC beaucoup plus sûr et plus facile.

Conformément à la directive Machines 2006/42/CE, POWER|2|DOOR est une machine partielle. L’accessoire POWER|2|DOOR pour machine CNC est destiné à être monté sur les machines CNC pour ouvrir et fermer automatiquement les portes de l’équipement CNC.

Pourquoi utiliser POWER|2|DOOR ?

  • Augmentation de l’efficacité de la machine
  • Automatique
  • Rapide et sûr
  • Facile à installer
  • Efficacité énergétique
  • Se rétracte à 100 % dès l’ouverture de la porte

Cas d’utilisation prévus

L’équipement est conçu pour ouvrir automatiquement les portes, augmenter l’efficacité et fournir un environnement de travail sûr. Il peut être intégré à d’autres équipements :

  • Collaborative Robot
  • Robot industriel
  • Opérateur CNC manuel

Facile et rapide à installer

Offre un haut niveau de sécurité à tous les employés

Conçu pour fonctionner sur les atypique atypiques

Ce set contient :

  • 1 x Actionneur incl. moteur et encodeur
  • 1 x contrôleur installé dans une armoire de commande complète
  • 2 x Supports de montage
  • Câbles

Normes


ISO 13849-2:2014 DS/EN 13849-2:2014 Safety of machinery – Safety-related parts of control systems – Part 2: Validation DS/EN 60204-1:2018/Ret. 1:2020 Safety of machinery – Electrical equipment of machines – Part 1: General requirements – CORRECTIONS 1 ISO 23125:2015 Machine tools — Safety — Turning machines ISO 14120:2015 Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards Section 5.2.5.4 – Power-Operated Guards ISO 12100:2011 DS/EN ISO 12100:2011 Safety of machinery – General principles for design – Risk assessment and risk reduction ISO 13857:2019 Safety of machinery – Safety distances to prevent hazard zones being reached by upper and lower limbs ISO 13855:2010 DS/EN ISO 13855:2010 Safety of machinery – Positioning of safeguards with respect to the approach speeds of parts of the human body

spécification

Poids 19,3 kg
Marque

StackIT
Course maximale

900 mm
Vitesse maximale

350 mm/seconde
Force N max.

400 N
Puissance du moteur

140 W
Tension du moteur

24 VDC
Courant max. du moteur

8,4 A
Fréquence

50/60Hz
Classe IP

20
Type de contrôleur

P2D-V1
Tension (contrôleur)

1X100-240 VAC+N+PE
Courant maximal (contrôleur)

5,9A
Nombre maximum d'actionneurs (par contrôleur)

1

Vente au consommateur



garantie

12

Normes


ISO 13849-2:2014 DS/EN 13849-2:2014 Safety of machinery – Safety-related parts of control systems – Part 2: Validation DS/EN 60204-1:2018/Ret. 1:2020 Safety of machinery – Electrical equipment of machines – Part 1: General requirements – CORRECTIONS 1 ISO 23125:2015 Machine tools — Safety — Turning machines ISO 14120:2015 Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards Section 5.2.5.4 – Power-Operated Guards ISO 12100:2011 DS/EN ISO 12100:2011 Safety of machinery – General principles for design – Risk assessment and risk reduction ISO 13857:2019 Safety of machinery – Safety distances to prevent hazard zones being reached by upper and lower limbs ISO 13855:2010 DS/EN ISO 13855:2010 Safety of machinery – Positioning of safeguards with respect to the approach speeds of parts of the human body

Avis

Il n’y a pas encore d’avis.

Seuls les clients connectés ayant acheté ce produit ont la possibilité de laisser un avis.

Plus d'offres pour ce produit!

Shipping Policy

1.1 For orders where the Seller is arranging transport and are delivering the goods at the buyers requested delivery address, the delivery terms are: DAP – Delivery At Place (Buyers delivery address) Incoterms® 2020. The Seller delivers the goods to a named place of destination, but is not responsible for unloading. His responsibilities include packing, export clearance, carriage expenses and any terminal costs up to the agreed destination. The Buyer is responsible for all costs, duties and taxes associated with unloading the goods. He is also responsible for clearing customs to import the products into the named country of destination.

1.2 For orders where the Buyer is picking up or arranging transport of the goods from Sellers address the delivery terms are: EXW - Ex Works (Sellers address) Incoterms® 2020. The Seller is responsible for making the goods available at its premises. The Buyer handles all costs and risk after the products are collected.

Cancellation / Return / Refund Policy

2.1 Orders can be cancelled until they have been shipped. However maximum 24 hours after the order has been placed.

2.2 Standard products kept in store by the Seller can be returned until 7 days after delivery. The returned products must be unused and in original packaging to be refunded. The shipping costs are non-refundable. Products produced to order cannot be returned and refunded.

2.3 Se how to initiate a return here.

Warranty Policy

3.1 The Seller warrants to the Buyer that all products delivered by the Seller are free of defects in relation to materials, design and finish (the \"Warranty\"). The Warranty applies for the warranty period for the specific product, and any claim from the Buyer under the Warranty must have been made in writing to the Seller within the warranty period. The warranty period for the product is specified on the MEMIDOS product page. The warranty period is counted from delivery of the product.

3.2 Complaints must be made in writing and be received by the seller no later than 6 working days after the
error/defect could have been discovered using general diligence. In all events, a complaint must have taken place before expiry of the warranty period.

3.3 In case of timely complaints, see 3.2, The Seller is obliged, at the Seller’s own choice, to redeliver or repair products not in compliance with the Warranty. This is the Buyer’s sole remedy in the case that supplied product are not in compliance with the Warranty or otherwise defective. The Seller is not obliged to pay the installation costs in the events where installation can usually be made by the Buyer.

3.4 The warranty only applies if the product has been handled, stored and used with the proper care, for the intended purpose and in compliance with applicable law, user instructions and other instructions from the Seller, and that the products supplied, have not been changed or otherwise modified in any way. No warranty is granted for wearing parts, and usual wear and tear are not covered by the warranty.

3.5 No warranty is granted to products that can be categorised as wearing parts or consumables.

Produits similaires